SAE AS 27429 pdf download

SAE AS 27429 pdf download.SPLICE,CONDUCTOR.DISCONNECT.CRIMP STYLE,COPPER,INSULATED BARREL,TYPE IL,CLASS 1FOR 105°C TOTAL CONDUCTOR TEMPERATURE.
NOTES:
1. MATERIAL
(a) FOR MS27429-l AND MS27429-2.
ASTM-B-36-66 52T ALLOY NO. 230, DISCONNECT PORTION HARD TEMPER ROCKWELL 865 MINIMUM. OR ASTM-B-152-56, DISCONNECT PORTION HARD TEMPER, ROCKWELL F92 MINIMUM
(b) FOR MS27429-3:
ASTMB-152-66 DISCONNECT PORTiON HARD TEMPER, ROCKWELL F92 MINIMUM!
(C) INSIAATION SLEEVE: THERMOPLASTIC (NYLON OR POLYETHYLENE)
2. FINISH: ELECTRO-TIN. PLATE .0001 INCH MINIMUM-THICKNESS TO MIL-T-10727.
3. INDENT .MINIMLAA TO PREVENT INCORRECT ASSEMBLING
4. RELIEF TO ALLOW ftUSH MATING OF SURFACES
5. UPSET TO ASSIST RETAIN*IG ACTION .002-012 (BETWEEN MATED SURFACES).
7. BREAK ALL SHARP EDGES AND REMOVE ALL BURRS.
6. THESE FITTINGS ARE USED IN PAIRS WHEN MATING ANY TWO FITTINGS MUST FORM A TiGHT SECURE SPLICE
9. OUALIFICATION: FOR OUALIFICATION: SPLICES (MATED) SHALL BE TESTED WITH ANY ONE OF THE
FOLLOWING WIRES: MIL-W-5086, MIL-W-16878 EXCEPT 4,/S OR /10, MIL-W-22759/I, /9 OR II OR
MIL-W-6136111. f3 OR /7 AND TOOLING AS FOLLOWS. MIL-C-225205-01 TOOLING WITH MIL-C-225205-100 DIES
INSTALLED FOR SIZES 22 THROUGH 10 SPLICES. OR MIL.C.22520:l0.0l TOOLING WITH MIL-C-2252G’lO-IOl
DIES W4STALLED FOR SIZES 22 THROUGH 14 SPUCES AND ML-C-2252G’lO-lOO DIES INSTALLED FOR SIZES 12
THROUGH 10 SPLICES. EXISTING MS90413 AND M53316 TOOLS IN THE FIELD MAY BE USED UNTIL WORN
OUT
10. DIMENSION REPRESENTS THE MINIMUM OPENING THAT W ACCEPT THE F*4ISHED WIRE.
11. CONTOUR INDICATED BY PHANTOM LINES MAY VARY FROM THAT SHOWN TO SUIT INDIVIDUAL MANUFACTURER’S DESIGN
12. INSULATION SUPPORT AND TERMINAL BARREL MAY BE MULTIPLE PIECE CONSTRUCTiON
13. WIRE INSERTION SHALL BE FACILITATED BY BELL MOUTH,
14. THE GOVERNMENT HAS A ROYALTY-FREE LICENSE UNDER U.S. PATENT NO. 3516,043 DATED JUNE 2. 1970,
ENTITLED HERMAPHROOITIC DISCONNECT TERMINAL FOR THE BENEFIT OF MANUFACTURE OF THE ITEMS
ILLUSTRATED HEREIN EITHER FOR THE GOVERNMENT OR FOR USE IN EOUIPMENT TO BE DELIVERED TO
THE GOVERNMENT.