BS EN 04641-103:2010 pdf download
BS EN 04641-103:2010 pdf download.Aerospace series -Cables,optical 125 um diameter cladding Part 103: Semi-loose, ruggedized simplex construction 62,5/125um Gl fibre nominal 2,74 mm, outside diameter ——Product standard.
BS EN 04641-103 specifies the general characteristics, conditions for qualrticallon. acceptance and quality assurance for a fre optic cable with a 62.5/125 pm single mode fibre core. 2,74 mm outside cable diameter and of semi-loose construction. The basic construction is the cable defined In EN 4641-102 with added sheaths for ruggedized usages.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2424. Aerospace series — Marking 0/aerospace products
EN 2812. Aerospace series — cables”
EN 3475-601. Aerospace series — Cables. &ectncal. aircraft use — Test methods — Part 601: Smoke density
EN 3475•602, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 602. Tocic.ity
EN 3745-100. Aerospace series — Fibres and cables, opticaL aircraft use — Test methods — Part 100: General
EN 3838, Aerospace series — Requirements and tests on user-applied markings on aircraft electrical cables
EN 3909. Aerospace series — Test fluids for electric components and sub-assemblies
EN 4641-102. Aerospace series — Cables, optical 125 um outside diameter cladding — Part 102: Semi-loose 62,5/125 in Gi fibre nominal 1,8mm outside diameter— Product standard
EN 9133. Aerospace senes — Quality management systems — Qualification procedure For aerospace standard parts
TR 4647, Aerospace series — Termination procedure for EN 4639 opL’cal contact2t
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3745-100 apply.
4 Required characteristics
The characteristics of the cables, tested according to the methods described hereafter shall comply with the values defined in this product standard.
