BS EN 4500-003:2012 pdf download

BS EN 4500-003:2012 pdf download.Aerospace series一Metallic materials – Rules for drafting and presentation ofC) section;
The term may be quahfied with one or more of the following terms:
– extruded:
— hot rolled.
d) tube;
The term may be qualified with one or more of the following terms:
— rolled; drawn;
— extruded:
— seamless; welded,
e) wire;
The term may be qualified w*b one or more of the following terms:
— drawn:
— hot rolled.
f) forging stock;
g) forgings;
The term may be qualified with one or more of the following terms:
— die;
— hand.
h) remening stoci.
I) castings;
The term may be qual,fod with one or more of the following terms.
— sand:
— chill; investment:
— centrifugal:
— preci5aon:
— hot isostatically pressed Chipped), material standards Part 003: Specific rules for heat resisting alloys.
4.1.4 Form entries for powder metallurgy
— powder;
— compacted matenal;
— part
The term may be qua hfed with one or more of the following terms:
— hot isostaticafly pressed (hipped);
— extruded:
— forged.
4.1.5 Additional Information entries
— for structural apphcatsons:
— for pressure applications;
— for rivets:
— for forged fasteners.
— for forged nngs:
— for machined fasteners:
— for we4ding.
4.2 Page 2
See EN 4500-001.
4.3 Page 3
See EN 4500-001 and Example 2 of this standard.
4.4 Page 4
4.4.1 Page 4, line 1: Material designation
See EN 4500-001 and Example 3 of this standard.
4.42 Page 4, line 2: Chemical composition
The chemical composibon shall be written m accordance with EN 4500-001 and the order of presentation of elements shall conform to the following rules:
— C,Si,Mn.P.S;
— alloying elements in alphabetical order using their chemical symbol;
— ratio ani/or total of above elements in alphabetical (wder
— trace elements in alphabetical order.
4.4.3 Page 4, lIne 3: Method of melting
See EN 4500-001 and Example 3 of this standard, Using the terms listed in 4.1.2.
4.4.4 Page 4, lIne 4.1: Form
See EN 4500-001, and Example 3 of this standard.
44.5 Page 4, line 4.2: Method of production
See EN 4500-001, and Example 3 of this standard, usang the applicable terms given In 4.1.
4.4.6 Page 4, line 4.3: Limit dimension(s)
See EN 4500-001 and Example 3 of this standard.
4.4.7 Page 4, lIne 5: TechnIcal sp.clflcatlon
See EN 4500-001 and Example 3 of this standard.
4.4.8 Page 4, lIne 6.1: DelIvery condition and Heat treatment
See EN 4500-001 and Example 3 of this standard. Use one or more of the following terms:
— not heat treated:
— annealed:
— solution treated:
— precipitation treated:
— tempered:
— cold worked;
hot isostatically pressed (flipped):
— descaled.
— machined:
— ground:
as cast:
— as forged.
4.4.9 Page 4, line 6.2: Delivery condition code See EN 4500-001 and Example 3 of this standard.