BS EN ISO 4064-3:2014 pdf download
BS EN ISO 4064-3:2014 pdf download.Water meters for cold potable water and hot water Part 3: Test report format.
This part of ISO 4064101ML R 49 specifies a test report format to be used in conjunction with ISO 4064-1IOIML R 49-1 and ISO 4064-2IOIML R 49-2 for water meters for cold potable water and hot water.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable [or its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 4064-1:ZOl4lOlML. R 49-1:2013, Water meters for cold potable water and hot water — Part 1:
Metrological and technical requirements
ISO 4064-2:2O14IOIML R 49-2:2013. Water meters for cold potable water and hot water — Part 2: Test methods
3 Terms, definitions, symbols, and abbreviated terms
For the purposes of this document, the terms and definitions given in ISO 4064-1 IOIML R 49-1 apply.
Some symbols and abbreviated terms used in the tables areas follows.
+ pass
— fail
n/a not applicable
EUT equipment under test
H horizontal
MAP maximum admissible pressure
MAT maximum admissible temperature
MPE maximum permissible error
V vertical
4 Type evaluation report
4.1 General
For each examination and test the checklist shall be completed according to this example.
