ASME A112.19.13-2001 pdf download
ASME A112.19.13-2001 pdf download.ELECTROHYDRAULIC WATER CLOSETS.
This Standard establishes performance. elcctncalklectronic contormance. temperature. life cycle. maxiing. and identification requirements forsater closets.
The use ot alternate materials or methods are permitted. provided the proposed material or method complics with the performance requirements and intern of this Standard.
12 Units of Measurement
Values are stated in U.S. Customary units and the International System of Units (SI>. The US. Customary units shall be considered as the standard.
1.3 Reference Standards
The following documents form a part of this Standard to the extent spedlied herein. Unless t*herisc mdica*cd. the latest issue shall apply.
ANSI Zl24.4, Plastic Water Closet Howls and Tanks
Publisher: International Association of Plumbing and Mechanical Officials. 20(101 East Walnut Drive South. Walnut. CA 9l7K9
ASME A112.19.2M,Vitrcous China Plumbing Fixtures ASME Al 12.19.6, Hdraolic Performance Requirements for Water Closets and Urinals
Publisher: The American Society of Mechanical Engi. neers. ASME Order Department. 22 Law Drive. Box 23(10. Fairfield. Ni
UI f2. Flexible Cord and Fixture Wire
UI 157, Gaskets and Seals
IL 244A- 1994. Solid-State Controls for Appliances
UI 746C. Polymeric Materials — Used in Electrical Equipment Evaluations
UI 77X. Motor Operated Water Pumps
IlL 796, Printed-Wiring Boards
UL NIl. Cciii Scts and Power-Supply Cords
2.9 Pump Temperature Testing
Thc pump shall he tested as dcscnhed in para. 2.2N. section 34 of UL 7714. at the maximum duty cycle the pump will allow.
2.10 Wiring Harness Entrance and Location
The wiring harness and electrical controls nu( enclosed in the pump housing shall be located abase the flood level rim of the tank or reservoir and abase the drains or overflows.
2.11 life Cycle Test
The electrical components and pump shall pass a 75,000 life cycle test. The test shall he performed on the waler closet at the maximum cycle rate the electronic controls will allow. Upon completion of the life cycle tesi. the average volume per flusji shall nct vary more than 0.15 gal (0.57 L) or 10%. whichcscr is grcatcr.
3 MARKING AND INSTRUCTiON MANUAL
3.1 Marking
3.1.1 Water Closet. The water closet shall be legibly marked as specilied in ASNW Al l2.19.2M and other standards referenced in this Standard (see para. 1.3).
3.1.2 Pump. The pump shall have the following markings visible on it in its normal operating position and a second label visible on the exterior of the water closet or cord slating:
The word warning shall he a minimum of in.2.4 mm high.
