BS EN 4800-002:2010 pdf download
BS EN 4800-002:2010 pdf download.Aerospace series —Titanium and titanium alloys- Technical specification Part 002: Bar and section.
3 Terms and definitions
For the purposes of this document. the terms and definitions given in EN 4259 apply.
4 Wording of order
The order shall clearly indicate:
— quantities to be supplied:
— dates of delivery;
material standard number;
— delivery condition and metallurgical code of products.
— dimensions and tolerances or reference to an appropriate dimensional standard:
— product designation, when required:
— forwarding address;
— nature and type of packing, if required;
— definition and frequency of any special tests and thelr retest procedures. If required.
5 Health and safety
The products in the delivery condition shall fulfil the health and safety laws of the area of the country when and where it is to be delivered.
A product safety data sheet shall be available.
6 Technical requirements
6.1 General
The product shall be manufactured in accordance with the requwements of the relevant material standard and the applicable requirements of this specification. A manufacturing schedule shall be established and applied in accordance with EN 2078.
Product shall satisfy the requirements of the material standard andlor order arid shall be free from irregularitie5 prejudicial to the subsequent manufacture or use of thãs product.
Notwithstanding prevus acceptance complying with this material standard, any product that is found, at a later stage, to contain audi defects shall be reected.
Unless otherwise specified, the requirements in Tables 1 and 2 shall apply in conjunction with those of the relevant material standard Table 1 relates to lines I to 29 (inclusive) of the material standard and Table 2 relates to lines 30 onwards in which the sub.line format is also used. Lines 2 to 98 may also be opened in line 100 if the material standard details specific qualification requirements If a specific line number is not shown in Tables 1 and 2. the requirement Is stated in the material standard andfor order.
