BS-EN-500-6:2006 pdf download
BS-EN-500-6:2006 pdf download.Mobile road construction machinery – Safety — Part 6: Specific requirements for paver-finishers.
5.15 ElectrIcal and electronic systems
5.16 of EN 500-1:2006 applies.
5.16 Electro-magrtetic compatibility (EMC)
517 of EN 500-1:2006 applies with the following addition:
the antenna shall be located successively o, the left- and right-hand sides of the paver-hnësher, with the anlenna parallel to the plane of the longitudinal symmetry of the paver-finisher and in line with the SIP
5.17 Noise and vibration
5.18.2 and 5.18.3 of EN 500-1:2006 apply with the following addition:
— for the determination of the noise values. Annex B applies to paver-finishers and Annex C applies to slipform payers.
5.18 Conveyors
Hopper conveyots need not to comply with 5.19 of EN 500-1:2006,
6 Verification of safety requirements andlor protective measures Clause 6 of EN 500-1:2006 apphes.
7 Information for the user
7.1 Warning signals and devices
Annex E of EN 500-1:2006 applies.
7.2 InstructIon handbook
7.2 of EN 500-1:2006 applies with the following additions:
information for a safe cleaning of the hopper and auger:
infoimaton for a safe handling of gas bottles
7.3 Marking
7.3 of EN 500-1:2006 applies.
The brake systems shall meet the requirements of EN ISO 3450 with the following addittons and exceptions:
A.2 Machine mass
A.2.1 General
Clause 3 of EN ISO 3450 1996 applies with the folowing addition:
A.2.2 Operating mass
Operating mass n the heaviest version of Ihe paver-finisher, including canopy or cabin with all theW components and mountings and by considering all working elements to be fitted for the maximum working width approved by the manufacturer of the machine, including operator of 75 kg. half-full fuel tank and full lubricating system, hydraulic oil system and cooling system. If equipped, with half-full tanks for emulsion and emulsion solvent.
A.3 General requirements
A,.3.1 General
Clause 5 of EN ISO 3450:1996 applies with the fomowirig addition:
A.3.2 Disconnection
If a device is fitted for disconnection, such as a clutch or a gearbox, then this shall only be operated at standstl.
The brake systems are permitted to be effective via gear components and chains and to possess only one braking
surface for all wheels slowed down.
A.3.3 Service brake system
On machines with a hydrostatic traction drive developing a maximum speed of no more than 25 kmIh. this hydrostatic traction drive can at the same time be used as a service brake. After standstill, an unintentional movement shall not be possible.
The brake systems shall meet the requirements of EN ISO 3450 with the following addittons and exceptions:
A.2 Machine mass
A.2.1 General
Clause 3 of EN ISO 3450 1996 applies with the folowing addition:
A.2.2 Operating mass
Operating mass n the heaviest version of Ihe paver-finisher, including canopy or cabin with all theW components and mountings and by considering all working elements to be fitted for the maximum working width approved by the manufacturer of the machine, including operator of 75 kg. half-full fuel tank and full lubricating system, hydraulic oil system and cooling system. If equipped, with half-full tanks for emulsion and emulsion solvent.
A.3 General requirements
A,.3.1 General
Clause 5 of EN ISO 3450:1996 applies with the fomowirig addition:
A.3.2 Disconnection
If a device is fitted for disconnection, such as a clutch or a gearbox, then this shall only be operated at standstl.
The brake systems are permitted to be effective via gear components and chains and to possess only one braking
surface for all wheels slowed down.
A.3.3 Service brake system
On machines with a hydrostatic traction drive developing a maximum speed of no more than 25 kmIh. this hydrostatic traction drive can at the same time be used as a service brake. After standstill, an unintentional movement shall not be possible.
B.2.6 Repetition of the test
The A-weighted sound power level shall be determined at least three times. If at least two of the determined valuesdo not differ by more than 1 dB, further measurements will not be necessary. Otherwise the measurements shall becontinued unti 2 values differing by no more than 1 dB are obtained.The A-weighted sound power level to be usedfor calculating the sound power level to be declared is the arithmetic mean of both highest values that do not differby more than 1 dB.
