ISO 06185-3:2001 pdf download

ISO 06185-3:2001 pdf download.lnflatable boats -Part 3: Boats with a maximum motor power rating of 15 kW and greater.
5.5.4 Strength of rowlocks
5.5.4.1 Requirement
There shall be no structural failure of the rowlock or associated fittings when tested as described in 5.5.4.2.
5.5.4.2 Test method
Any cordage used for test purposes shall have a diameter of 8 mm.
Load the rowing fitting, including the rowlock, with a force of 500 N for 1 mm in any horizontal direction.
5.5.5 Use of the rowlocks and oars
When tested as described in 7.5, there shall be no structural failures or permanent deformation of any component during the test and it shall be clearly demonstrated that the rowlock system is rigid enough for efficient rowing. A minimum unrestricted movement of the oars 600 ahead and 600 astern shall be required.
5.6 Transom (where applicable)
5.6.1 Requirement
The transom or motor mount and its attachment to the boat shall be designed to withstand, under normal use, the maximum stresses arising from
— the output power and torque of the motor(s) specified by the manufacturer, and
— the weight of such motor(s).
5.6.2 Test method
Visual inspection during and following in-water performance tests described in 7.3.
5.7 Hull drainage
If the boat is fitted with a transom, it shall be equipped with at least one drainplug or one bailing system.
For RIBs fitted with an integral closed hull/deck assembly which is not filled with closed-cell foam or equivalent, a facility shall be provided for draining the interior part of the hull (bilge).
Type VIII boats shall be capable of having totally flooded deck areas bailed or drained overboard without the use of a bilge pump (unless with a permanently installed manual bilge pump) in less than 3 mm. See bailing test in 7.8.
5.8 Remote steering system (where offered as standard or optional equipment)
Any remote steering system shall conform to the requirements of one or more of the following International Standards: ISO 8848, ISO 9775, ISO 10592 or ISO 15652.
There shall be no damage or malfunction to either the system or to any related attachments to the boat when tested in accordance with clause 7.
Type VIII boats shall be fitted with a factory installed remote steering system.
A means for attaching a motor-securing line shall be provided at an appropriate position.
5.10 Towing device (all types)
All boats shall have, at their bow, a towing device suitable for securing a towline. See 7.4 for strength test.
5.11 Seating and attachment systems (where offered as a standard or optional equipment)
There shall be no damage or malfunction to either the seating or to any related attachment systems when tested in accordance with clause 7.
Type VIII boats have a factory-installed seating and attachment system.
5.12 Electrical installations (where offered as standard or optional equipment))
Any electrical installations shall conform to the requirements of the following International Standards, as applicable:
ISO 10133, ISO 9097 or ISO 8849.
Type VIII boats shall be fitted with a factory-installed electrical system that conforms to ISO 10133.
Navigation lights, if fitted, shall meet the requirements of Colreg 72.
5.13 Fuel systems (where applicable)
Permanently installed fuel systems and fixed fuel tanks shall conform to ISO 10088.
Type VIII boats shall be fitted with a factory-installed permanent fuel system including permanent fuel tank(s).
5.14 Ventilation of petrol motor and petrol tank compartments (where applicable)
Ventilation of petrol motor and petrol tank compartments shall conform to ISO 11105.
6 Safety requirements of the completed boat
6.1 Maximum permissible number of persons
The maximum permissible number of persons ii carried shall be determined by the manufacturer and shall not exceed that calculated using the following formula:
The value n shall always be rounded down to the nearest integer but, if the first decimal place is greater than 5, achild may be added or, if greater than 7, an adult may be added.
For calculations, the body mass of a child is defined as 37,5 kg and the body mass of an adult as 75 kg.
The data displayed on the buider’s plate(s), see clause 8 e), shall include at least one adult and not more than onechild.