SAE AS 9712 pdf download
SAE AS 9712 pdf download.sCREW.MACHINE- DOUBLE HEXAGON,EXTENDEDwASHER HEAD,DRILLED,SILVER PLATED,CORROSION &HEAT RESISTANT STEEL,.138-40 UNUJF-3A.
REQUIREMENTS
I MATERIAL CORROSION AND HEAT RESISTANCE STEEL IN ACCORDANCE WITH AMS 5708
2 FINISH SILVER PLATE IN ACCORDANCE WTN AMS 241D 0002 0006 THICK AT THREAD PD, DIMENSIONS SPECIFIED ARE AFTER PLATING
3 THREADS THREADS IN ACCORDANCE WITH Mit-S-eels INCOMPLETE THREADS NOT TO ENTER FILLET
4 WSENCHING CONFIGURATION VRENCHING CONFIGURATION IN ACCORDANCE WITH AS 870
S DIMENSIONING AND TOLERANCING DIMENSIONING AND TOLERANCING SHALL BE IN ACCORDANCE WITH ANSI Y14.SM
8. SURFACE TEXTURE. SURFACE TEXTURE, UNLESS OTHERWISE SPECIFIED, SHALL BE 128 MICROINCHES EXCEPT UPSET HEAD IN ACCORDANCE WITH ANSI 846 I
7. FLUORESCENT PENETRANT INSPECTION FLUORESCENT PENETRANT INSPECTION SHALL BE IN ACCORDANCE WITH AMS 26443 BEFORE PLATSIG
8. HEAD TO SHANK FILLET: HEAD TO SHANK FILLET SHALL BE COLD ROLLED AFTER HEAT TREATMENT TO REMOVE ALL VISUAL EViDENCE OF GRINDING OR TOOl. MARKS EXCEPT DASH NUMBER SIZES .10 AND SMALLER
9. MARKING: MARK PART NUMBER AND MANUFACTURER’S IDENTIFiCATION IN ACCORDANCE IMTH AS 478.79. CLASS A
IS TOLERANCES UNLESS OTHERWISE SPECIFIED. TOLERANCES SHALL BE FOR LINCAR DIMENSIONS • DID, ANGULAR DIMENSIONS t5.
II EDGES BREAK SHARP EDGES 3.0IS UNLESS OTHERWISE SPECIFIED
12 PROCUREMENT SPECIFICATION AMS 7471
13 PART NUMBER THE PART NUMBER SHALL CONSIST OF THE BASIC MS NUMBER FDLLO%I%ED BY A DASH NUMBER FROM TABLE I
