SAE J586 pdf download
SAE J586 pdf download.Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width.
2. References
2.1 Applicable Publications—The following publications form a part of this specification to the extent specified herein. Unless otherwise indicated, the latest issue of SAE publications shall apply.
2.1.1 SAE PuBLIcATIoNs—Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J567—Lamp Bulb Retention System
SAE J575—Tests for Motor Vehicle Lighting Devices and Components
SAE J576—Plastic Materials for Use in Optical Parts Such as Lenses and Reflectors of Motor Vehicle Lighting Devices
SAE J578—Color Specification
SAE J579—Lighting Code Identification
SAE Ji 050—Describing and Measuring the Driver’s Field of View
2.2 Related Publications—The following publications are provided for information purposes only and are not a required part of this document.
2.2.1 SAE PuBLIcATIoNs—Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J222—Parking Lamps (Front Position Lamps)
SAE J585—Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width
SAE J586 FEB84—Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width
SAEJ588 NOV84—Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width
SAE J592—Clearance, Side Marker, and Identification Lamps
SAE J594—Retlex Reflectors
SAE J1395 MAY85—Front and Rear Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
SAE J1398—Stop Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
SAE J1957—Central High Mounted Stop Lamp Standard for Use on Vehicles Less than 2032 mm Overall Width
SAE J2040—Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width
SAE J2042—Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
2.2.2 NHTSA PuBLIcATIoN—Available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.
FMVSS1O8 56 FR 64733—64737
3. Definitions
3.1 Stop Lamps—Lamps giving a steady light to the rear of a vehicle to indicate the intention of the operator of a vehicle to stop or diminish speed by braking.
4. Lighting Identification Code—Stop lamps for use on vehicles less than 2032 mm in overall width may be identified by the code “S” in accordance with SAE J759.
5. Tests
5.1 SAE J575 is a part of this document. The following tests are applicable with modifications as indicated.
5.1.1 VIBRATION TEST
5.1.2 MOISTURE TEST
5.1.3 DUSTTEST
5.1.4 CORROSION TEST
5.1.5 PHOTOMETRY TEST
5.1.5.1 Photometric measurements shall be made with the light source of the signal lamp at least 3 m from the photometer. The H-V axis shall be taken as parallel to the longitudinal axis of the vehicle.
5.1.5.2 Photometric measurements shall be made with the bulb filament steadily burning. Photometric measurements of multiple compartment lamps or multiple lamp arrangements shall be made by either of the following methods by aligning the axis of each lamp or compartment with the photometer:
5.1.5.2.1 All compartments or lamps shall be photometered together provided that a line from the light source of each compartment or lamp to the center of the photometer sensing device does not make an angle of more than 0.6 degree with the photometer H-V axis. When compartments or lamps are photometered together, the H-V axis shall intersect the midpoint between their light sources.
5.1.5.2.2 Each compartment or lamp shall be photometered separately. The photometric measurement for the entire multiple compartment lamp or multiple lamp arrangement shall be determined by adding the photometric outputs from each individual lamp or component at corresponding test points.
5.1.6 WARPAGE TEST FOR DEVICES WITH PLASTIC COMPONENTS
5.2 Color Test—SAE J578 is a part of this document.
